INSTALLATION - TM-9-2350-277-20-2

FOLLOW-THROUGH STEPS - TM-9-2350-277-20-2_635

TM-9-2350-277-20-2 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 Carrier Command Post Light Tracked M577A3 2350-01-369-6085 Manual
Page Navigation
551

TM 9-2350-277-20-2 REPLACE COOLANT PUMP IDLER PULLEY/BELTS — Continued 0240 00 3. If damaged, remove two screws (4), washers (3), idler adjusting bracket (2) and idler pulley (7) from engine. INSTALLATION 1. If removed, install idler pulley (7) and idler adjusting bracket (2) on engine. Secure with two washers (3) and screws (4). Do not tighten screws. NOTE Drive belts must be replaced in matched sets. 2. Position two drive belts (5) on three pulleys (1)(6)(7). 3. Pry upward on tang of idler pulley assembly (5) to get 1/4 to 3/8 inch deflection on drive belts (6) midway between pulleys (1) and (3) while applying a firm push with thumb. Tighten two screws (4). 0240 00-2

Privacy Statement
Press Release
Contact