FOLLOW-THROUGH STEPS - TM-9-2350-277-20-2

INSTALLATION-cont. - TM-9-2350-277-20-2_593

TM-9-2350-277-20-2 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 Carrier Command Post Light Tracked M577A3 2350-01-369-6085 Manual
Page Navigation
514

TM 9-2350-277-20-2 REPLACE RADIATOR AND PARTS — Continued 0229 00 10. Attach a lifting device of at least 150 lb (68 kg) capacity to radiator support eyes (14). Lift and place radiator on power plant grill (15) between two end seals (13) and side seals (11). 11. Align mounting holes (16) of two radiator supports (17) to two plates (18) and power plant grill (15). Secure radiator (19) on plates (18) with four screws (20) and washers (21). Secure radiator on power plant grill with 6 screws (20), 12 washers (21), and 6 nuts (22). FOLLOW-THROUGH STEPS 1. Install balance hose (WP 0234 00). 2. Install grill intake elbow and hose (WP 0174 00). 3. Lower power plant grill (WP 0464 00). 4. Install power plant rear access panel (see your -10). 5. Install driver’s power plant access panel (see your -10). END OF TASK 0229 00-6

Privacy Statement
Press Release
Contact