TM 9-2350-277-20-2
ADJUST ACCELERATOR LINKAGE — Continued
0214 00
10. Install governor connecting link (1), washer (2), screw (3), and new locknut (4) on governor throttle arm (5). Tighten
jamnut (6).
11. Loosen pedal toe stop screw (7) and jamnut (8).
12. Depress accelerator pedal (9) until edge of connecting pin (10) is 1/32 to 1/16 inch (1 to 1.5 mm) away from washer (11).
Adjust pedal toe stop screw (7) and tighten jamnut (8). Have helper assist.
0214 00-5
