TM 9-2350-277-20-2ADJUST THROTTLE VALVE (TV) MODULATOR — Continued 0213 00NOTEIf shifts are within ranges, adjustment is complete. If not, do Step 2 and Step 3.2. If the upshift 1 to 2 is below 7 mph (11 km/h), do ADJUST Step 11 again.3. If upshift 2 to 3 is above 18 mph (29 km/h), do ADJUST Step 12 again.NOTEDo Step 4 only if the minimum/maximum shift points in Step 1 have not been obtained.4. If more adjustment is needed, reposition throttle valve modulator lever (1) as follows:a. Loosen hex nuts (2)(3)(4).b. Adjust lever (1) away from modulator bracket (5) if upshift 1 to 2 is below 7 mph (11 km/h).c. Adjust lever (1) toward modulator bracket (5) if upshift 2 to 3 is above 18 mph (29 km/h).d. Tighten hex nuts (2)(3)(4).5. Repeat Steps 1 - 4 until shift ranges are met.FOLLOW-THROUGH STEPS1. Install driver’s power plant access panel (see your -10).2. Close power plant front access door (see your -10).3. Raise trim vane (see your -10).END OF TASK0213 00-6
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
