TM 9-2350-277-20-1
STE/ICE TEST 32 AIR BOX PRESSURE
0123 00
THIS WORK PACKAGE COVERS:
Test (page 0123 00-1).
INITIAL SETUP:
Maintenance Level
Unit
Personnel Required
Unit Mech 63T10
References
See your -10
TM 9-4910-571-12&P
Equipment Condition
Engine stopped (see your –10)
Vehicle blocked (see your –10)
STE/ICE hooked up to DCA 6 (WP 0117 00)
1.
SELECT TEST 32.
2.
PERFORM OFFSET TEST.
a.
Press and hold TEST button until CAL appears. Release TEST button.
b.
If VTM reads between -3 to+3, offset test passes.
c.
If offset test fails, go to: STE/ICE Test 32 Diagnostic Troubleshooting (WP 0147 00).
3.
PRESS AND RELEASE TEST BUTTON.
4.
START ENGINE (see your –10).
5.
ACCELERATE ENGINE TO GOVERNED NO LOAD SPEED (WP 0155 00). RECORD READING.
a.
If VTM reads 6.0 or more at no load governed RPM, test passes.
b.
If error message appears, see TM 9-4910-571-12&P.
c.
If readings are erratic or cannot be obtained, go to: STE/ICE Test 32 Diagnostic Troubleshooting (WP 0147 00).
6.
STOP ENGINE (see your –10).
7.
RETURN TO TROUBLESHOOTING.
0123 00-1/2 blank
