TM 9-2350-277-20-1
STE/ICE TEST 69 STARTER NEGATIVE CABLE VOLTAGE DROP
0126 00
THIS WORK PACKAGE COVERS:
Test (page 0126 00-1).
INITIAL SETUP:
Maintenance Level
Unit
Personnel Required
Unit Mech 63T10
References
See your -10
TM 9-4910-571-12&P
Equipment Condition
Engine stopped (see your -10)
Vehicle blocked (see your -10)
STE/ICE hooked up to DCA 6 (WP 0117 00)
1.
Select TEST 69.
2.
Press and release TEST button.
3.
Turn MASTER SWITCH to ON.
4.
Press START switch for 3 seconds and observe VTM reading.
a.
If display reads.60 (volts) or less, test passes.
b.
If error message appears, see TM 9-4910-571-12&P.
c.
If engine cranks normally, but reading is erratic or cannot be obtained, go to: STE/ICE Test 69 Diagnostic
Troubleshooting (WP 0149 00).
5.
Turn MASTER SWITCH to OFF.
6.
Return to troubleshooting.
0126 00-1/2 blank