TM 9-2350-277-20-1
TRANSMISSION OIL LOW PRESSURE INDICATOR MALFUNCTIONS—Continued
0056 00
A8Y
1. Install harness 12349881 circuit 367 plug on parking brake switch
circuit 366 jack.
2. Replace TRANS OIL LOW PRESS indicator assembly
(WP 0287 00).
3. Verify no faults found.
BY
1. Remove TRANS OIL LOW PRESS lens, gasket, bulb, and gasket
from indicator assembly.
2. Measure voltage between center contact on indicator assembly
and ground.
3. Does multimeter read 17 volts or more?
YES
NO
GO TO CY (PAGE 0056 00-9)
B2Y
1. Remove cable assembly 12349858 circuit 367/27L plug (1) from
TRANS OIL LOW PRESS indicator assembly (2).
2. Check continuity between cable assembly 12349858 circuit 367/
27L plug (1) circuit 367 pin and ground.
3. Is there continuity?
YES
NO
B2YN
1. Remove jumper wire and install
harness 12349881 circuit 366 plug
on trans oil low press switch.
2. Replace TRANS OIL LOW PRESS
indicator assembly (WP 0287 00).
3. Verify no faults found.
0056 00-6
