TM 9-2350-277-20-1
TRANSMISSION OIL LOW PRESSURE INDICATOR MALFUNCTIONS—Continued
0056 00
DY
1. Install harness 12349881 circuit 366A plugs on brake switches
and 367/27L plug on indicator assembly.
2. Remove harness 12349813 circuit 366 plug (1) from harness
12349881 circuit 366 jack (2) behind instrument panel.
3. Check continuity between harness 12349813 circuit 366 plug (1)
and ground.
4. Is there continuity?
YES
NO
DYN
1. Remove jumper wire and install
harness 12349810 on switch.
2. Faulty harness 12349881 circuit 366.
Beyond unit maintenance repair.
3. Notify supervisor.
D2Y
1. Install harness 12349881 circuit 366 plug on stop light switch
circuit 366 jack.
2. Remove harness 12349810 plug (1) from harness 12349813 jack
(2) at carrier bulkhead.
3. Check continuity between harness 12349810 plug (1) pin K (3)
and ground.
4. Is there continuity?
YES
NO
D2YN
1. Install harness 12349813 circuit 366
plug on harness 12349881 circuit
366 jack behind instrument panel.
2. Replace harness 12349810 circuit
366 (WP 0361 00).
3. Verify no faults found.
0056 00-10
