TM 9-2350-277-20-1
WAIT INDICATOR FLASHES DURING START ATTEMPTS (PREGLOW OR
AFTERGLOW)—Continued
0018 00
Y
1. Remove front main wiring harness 12349873-1 (1) from J2
connector on controller (2).
2. Remove engine wiring harness 12349873-1 jack (3) from engine
compartment bulkhead (4).
3. Check continuity between engine compartment jack pin K (5)and
controller plug (6) pin A (7).
4. Does multimeter read 0 ohm?
YES
NO
YN
1. Repair or replace engine wiring
harness 12349873-1 circuit 406A
lead (WP 0359 00).
2. Verify no faults found.
0018 00-2
