TM 9-2350-277-20-1ENGINE DOES NOT START (COLD WEATHER ONLY)—Continued 0017 006Y1. Turn MASTER SWITCH OFF.2. Disconnect glow plug harness lead (1) from glow plug (2).3. Place multimeter red lead on glow plug and black lead on enginecylinder head.4. Is resistance less than 3 to 10 ohms?YESNO6YN1. Replace glow plugs that are notwithin 3 to 10 ohms range(WP 0209 00).2. Verify no faults found.7Y1. Remove engine wiring harness 12349873-1 (1) from J2 connectoron controller (2).2. Remove engine wiring harness 12349873-1 (1) jack (3) fromengine compartment bulkhead (4).3. Check continuity between engine compartment jack (3) pin K (5)and controller plug (6) pin A (7).4. Does multimeter read 0 ohm?YESNO7YN1. Replace engine harness 12349873-1circuit 406A lead.2. Verify no faults found.0017 00-3
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business