3-4
Section II ENGINE AND TRANSMISSION REPAIR
TM 9-2350-267-34
SEPARATION
NOTE
Repair of the engine and transmission
support maintenance.
is direct
CAUTION
Make sure powerpack is evenly balanced and
stable and properly supported on stand or blocks.
A
B
C
Disconnect two oil filter hoses (1).
Remove two elbows (2) from oil filters (3).
Install two elbows (2) on ends of hoses (1).
NOTE
All hoses are disconnected at the transmission. See
TM 9-2350-267-20 for disconnection of hoses from
engine after separation.
D
Disconnect oil cooler to transmission hose (4).
E
Loosen four screws (5) at oil cooler housing (6).
F
Unscrew connector (7) to disconnect transmission to oil
cooler hose (8).
G Remove one screw (9) and one lockwasher (10).
TA309684