ENGINE AND TRANSMISSION REPAIR (CONTINUED)
AR Attach sling (75) to engine at four lifting eyes and take up slack in sling
lines.
NOTE
Make sure that transmission support at transfer
assembly will prevent transmission from rolling
when engine is disconnected.
AS Remove 14 screws (76), 14 lockwashers (77) and 14 flat washers (78).
NOTE
Refer to TM 9-2350-267-20 for removal of:
electrical harnesses, oil tubes, coolant hoses, oil
falters and main coolant tube.
AT Remove wooden blocks.
AU Pull engine (79) away from transfer assembly (80).
TA312495
3-9
Change 1
TM 9-2350-267-34
