2-14
Change 4
TM 9-2350-267-34
FINAL DRIVE ASSEMBLY
EXCESSIVE OIL LEAKAGE AROUND FINAL DRIVE
Disassemble final drive and inspect for defective seals and
gaskets (p 7-7).
Replace faulty seals and gaskets.
BILGE PUMP
PUMP DOESN’T OPERATE WHEN MASTER AND BILGE PUMP
SWITCHES ARE IN THE ON POSITION
Disassemble bilge pump (p 9-l).
Replace worn or pitted brushes.
Test field coil and rotor assembly for short.
Repair bilge pump if short exists.
