CHAPTER 15
MAINTENANCE PROCEDURES:
AUTOMATIC FIRE EXTINGUISHER SYSTEM (AFES)
AFES CYLINDERS RECHARGING
Procedure for recharging AFES cylinders is contained in
TM 5-4210-218-13&P.
AFES ELECTRICAL WIRING HARNESSES (12351498, 12351499, 12351500 AND 12351501 ON VEHICLES 1 THRU 344 OR 12352315, 12352316, 12352353
AND 12352354 ON VEHICLES 345 AND ABOVE REPAIR
Test Equipment/Special Tools:
Gun, thermal heat (item 14, Appx D)
Insert, pliers, electrical (item 15, Appx D)
Pliers, slipjoint (item 17, Appx D)
Stripper, thermal (item 20, Appx D)
AFES repair tool kit (item 32, Appx D).
Material/Parts
Tags, marking (item 67, Appx B)
Tape, insulation (item 52, Appx B)
Replace electrical connector contact pins as follows:
A Align contact pin extraction tool with contact pin to be removed,
and slide tool over pin.
B With contact pin extraction tool perpendicular to connector face,
push pin part way out of the connector.
C Remove pin and connected wire from rear face of connector.
15-1
Change 4
TM 9-2350-267-34
