14-14
Change 1
TM 9-2350-267-34
ENGINE COMPARTMENT BULKHEAD lNSULATION AND SHIELDS: REMOVAL AND INSTALLATION (CONTINUED)
B
C
D
E
F
G
H
K
Remove seven screws (1) and seven flat washers (2) from shield
(3).
Remove five screws (4) and five flat washers (5), and remove
bracket (6).
Remove 10 screws (7) and 10 flat washers (8), and remove shields
(3 and 9) and access cover (10).
Remove personnel heater exhaust pipe (TM 9-2350-267-20).
Remove engine
air cleaner elbow duct and hose
TM 9-2350-267-20).
Remove six screws (11) and six flat washers (12). Remove shield
(13) from bulkhead wall (14).
Remove 12 screws (15) and 12 lockwashers (16), and remove 2
grilles (17) from shield (13).
Remove engine mount release bar (TM 9-2350-267-20).
Remove 13 screws (18) and 13 flat washers (19), and remove
shield (20).
Pry off and discard cemented insulation pieces (21, 22, 23 and
24).
T A 3 1 2 5 9 5
