RECTIFIER: DISASSEMBLY, lNSPECTION AND REPAIR, AND ASSEMBLY (Continued)

RECTIFIER: DISASSEMBLY, lNSPECTION AND REPAIR, AND ASSEMBLY (Continued) - TM-9-2350-267-34_157

RECTIFIER: DISASSEMBLY, lNSPECTION AND REPAIR, AND ASSEMBLY (Continued) - TM-9-2350-267-34_159

TM-9-2350-267-34 Hull Powerpack Drive Controls Tracks Suspension and Associated Components Carrier Ammunition Tracked Manual
Page Navigation
134

TM 9-2350-267-34 6-32 Change 4 RECTIFIER: DISASSEMBLY, INSPECTION AND REPAIR. AND ASSEMBLY (CONTINUED) F Check six terminals (27) for cracks. Replace if defective. NOTE Diodes (28 and 29) are opposite polarity. I G Test six diode pairs (28 and 29) (p2-9) for 3 ohms in conductive direction. Test J for nonconductive direction. Replace if defective. H Check connectors J-1 (32) and J-2 (30) for broken pins and loose leads. K Replace if pins broken. Crimp or resolder leads if loose. Check capacitor boards (34 and 36) for cracks, breaks, loose or missing terminals. Replace if defective. Test six capacitors (35) (p2-10). Capacitance should be 0.01 mfd ±10%. Replace assembly if defective. Test capacitor C-7 (37) (p2-10). Capacitance should be 3.0 mfd ±10%. Replace assembly if defective.

Privacy Statement
Press Release
Contact