LEFT CANISTER DOOR LATCH ASSEMBLY: REMOVAL, DISASSEMBLY, ASSEMBLY AND INSTALLATION (CONTINUED)
REMOVAL
ASSEMBLY
A Remove four screws (l), four flat washers (2), four lockwashers
A
Install shims (13) and strike (17) on door-mounted bracket (18)
(3) and plate (4) from inside vehicle hull. Discard lockwashers.
with two screws (14), two new lockwashers (16) and two flat
washers (15).
B
For vehicles 34 and up only, remove two screws (5) releasing
spacer (6) from hull.
B
Install handle (12) on latch assembly (10) with new spring pin
(11).
DISASSEMBLY
c
Install latch assembly (10) and shims (7) on plate (4) with four
NOTE
screws (8) and four new lockwashers (9).
Note number and position of shims to ensure pro-
INSTALLATION
per assembly.
A
Apply zinc chromate paste (item 46, Appx D) between mount-
A Remove four screws (8), four lockwashers (9), latch assembly
ing surfaces of plate (4) or spacer (6) and vehicle hull.
(10) and shims (7) from plate (4). Discard lockwashers.
B
For vehicle 34 and up only, install spacer (6) on hull with two
B
Remove spring pin (11) and handle (12) from latch assembly (10).
screws (5).
Discard spring pin.
c
Install plate (4) and attached parts on hull or spacer (6) with
c
Remove two screws (14), two flat washers (15), two lockwashers
four screws (l), four flat washers (2) and four new lockwashers
(16), shims (13) and strike (17) from door-mounted bracket (18).
(3).
Discard lockwashers.
TA312943
9-44.1
Change 1
TM 9-2350-267-20
