TRAILER RECEPTACLE WIRING HARNESS (12330246): REMOVAL, DISASSEMBLY, ASSEMBLY AND INSTALLATION (CONTINUED)REMOVALIWARNINGTurn MASTER switch OFF. Disconnect batteryground cables.A Open and secure battery compartment doors.B Disconnect five connectors (1) from harness 12330252 connec-tors (2).C Disconnect two wiring harness ground lugs (3) from vehiclemounting studs by removing screw (4) and two lockwashers(5). Discard lockwashers.D Remove two harness straps (6) by removing from each onescrew (7), lockwasher (8) and flat washer (9). Discardlockwashers.Do not remove other harnesses from straps.Reinstall hardware after harness removal.E Remove four screws (10), four lockwashers (11) and receptaclecover (12). Discard lockwashers.FPull receptacle (13) and gasket (14) with wiring harness (15) at-tached from rear of vehicle.G Unscrew cap (16) from receptacle (13) and slide back on wiringharness (15).H Pull grommet (17) from receptacle (13).IRemove receptacle (13) and gasket (14). Discard gasket.TA3128186-128.1Change 1TM 9-2350-267-20
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
