ACCESSORY CONTROL BOX TO AFES HARNESS, AFES RELAYS, AND PERSONNEL VENTILATION BLOWER WIRING
HARNESS (12351461): REMOVAL, DISASSEMBLY, ASSEMBLY AND INSTALLATION (CONTINUED)
REMOVAL
A
B
C
D
E
F
G
Disconnect harness plug (1) from personnel ventilation blower (2).
Remove screw (3) and two lockwashers (4) and disconnect ground wire (5)
from forward bulkhead. Discard lockwashers.
From each of three strap assemblies (6), remove one screw (7), one flat
washer (8), and one lockwasher (9). Separate harness from other harnesses.
Reinstall strap assemblies (6). Discard lockwashers.
Disconnect harness plugs (10 and 11) from accessory control box (12).
Disconnect harness connector (13) from connector of harness 12330257,
CKT 48 (14).
Disconnect two AFES harness plugs (15) from bracket-mounted connectors
(16) (12351500 and 12351498 for vehicles 1 thru 344; 12352354 and
12352316 for vehicles 345 and above).
Remove each bracket-mounted connector (16) by removing from each four
screws (17), eight flat washers (18), four lockwashers (19), and four nuts
(20). Discard lockwashers.
6-97
Change 4
TM 9-2350-267-20
