6-78
Change 4
TM 9-2350-267-20
CARGO COMPARTMENT WIRING HARNESS (12330257): REMOVAL. DISASSEMBLY. ASSEMBLY AND INSTALLATION (CONTINUED)
Tape, electrical (item 60, Appx D)
Battery ground cables disconnected (p 6-44).
Drivers instrument panel removed (p 6-19).
APU control box removed (p 13-35).
NBC M2A2 air purifier removed (p 14-3).
M-45 periscope stowage box removed (p 10-11).
REMOVAL
A Disconnect seven leads (1) from circuit breakers (2) on panel (3).
B Disconnect four leads (4) from circuit breakers (2) on panel (5).
C Disconnect lead (6) from harness (7).
D Disconnect hamess (8) plug (9) from drivers bulkhead disconnect receptacle.
NOTE
For steps E, J, N, R, and U, reinstall screws and flat
washers on each strap to support remaining harnesses.
E
Remove wiring harness (8) from two straps (10) by removing two screws
(11), two lockwashers (12), and two flat washers (13) at only one end of each
strap. Discard lockwashers.