ACCESSORY DRIVE ADAPTER: REMOVAL AND INSTALLATION
A
B
c
D
Remove alternator (p 6-4).
Remove three bolts (1), three lockwashers (2), two bolts (3), one bolt (4),
washer (5), lockwasher (6), and nut (7).
Remove accessory drive adapter (8).
Remove coupling drive (9) and inspect it for unusual wear and cracks.
Replace if defective.
Remove and discard housing gasket (10).
INSTALLATION
Install in reverse order of removal using new gasket.
6-4.1/(6-4.2 blank)
Change 4
TM 9-2350-267-20