SURGE TANK HOSES AND FlTTlNGS: REMOVAL AND INSTALLATION (CONTINUED)
J
Loosen swivel nut (23) at crossover tube (24) and swivel nut (25) at elbow
D Install clamp (29) with screw (27) and new lockvvasher (28).
(26).
E
Install tube (22) and tighten clamp (21).
K Remove screw (27), lockwasher (28) and clamp (29). Discard lockwashers.
F
Install tube (20) and tighten clamp (16).
L Remove hose (30).
G Install two clamps (19) with two screws (17) and two new lockwashers
M Remove two clamps (31) and hose (32).
(18).
N Remove five elbows (6, 26, 33, 34 and 35), connector (36) and plug (37) frorn
H Install hose (13) and tighten two clamps (15).
surge tank (38).
I
Secure two clamps (14) around hose (13) with two screws (10), two new
INSTALLATION
lockwashers (11) and two nuts (12).
A Install plug (37), connector (39 and five elbows (35, 34,33,26 and 6) in
J
Install hose (9) and tighten two hose clamps (8).
surge tank (38).
K Install hose (7) by tightening swivel nut (5) at elbow (6) and swivel nut (3)
B Install hose (32) and two clamps (31).
at elbow (4).
C Install hose (30) by tightening swivel nut (25) at elbow (26) and swivel nut
L
Install clamp (2) with screw (1).
(23) at crossover tube (24).
5-17
Change 1
TM 9-2350-267-20