TM 9-2350-267-20
5-4
OIL COOLER HOSES: REMOVAL AND INSTALLATION
REMOVAL
A
B
C
D
E
F
Remove two drain plugs (1) from oil filters (2). Drain oil
from filters.
Remove two nuts (3) to disconnect hoses (4 and 5).
Remove four screws (6) and four lockwashers (7).
Remove split flange (8), preformed packing (9) and hose
(4) from front of engine oil cooler. Discard preformed
packing (9).
Remove four screws (10) and four lockwashers (11).
Remove split flange (12), preformed packing (13) and hose (5)
from rear of engine oil cooler. Discard preformed packing (13).
INSTALLATION
A Reverse removal procedures.
B
Install new preformed packing (9 and 13).
C Check engine oil level (LO 9-2350-267-12).
