4-14.2
Change 2
TM 9-2350-267-20
SECONDARY FUEL FILTER LIFTING BRACKET: REMOVAL AND INSTALLATION
REMOVAL
A Open and secure both transmission access doors.
NOTE
It is not necessary to disconnect fuel lines or drain
fuel filter.
B
Remove two screws (1), two nuts (2), two lockwashers (3) and
two flat washers (4) that secure secondary fuel filter (5) to lif-
ting bracket (6). Discard lockwashers.
C Remove three screws (7), three lockwashers (8) and surge tank
tube retaining strap (9) and remove lifting bracket (6) from
transmission. Discard lockwashers.
INSTALLATION
A
Install lifting bracket (6) and surge tank retaining strap (9) on
transmission with three screws (7) and three new lockwashers
(8).
B Secure secondary fuel filter (5) to fuel filter lifting bracket (6)
with two screws (1), two flat washers (4), two new lockwashers
(3) and two nuts (2).
C Close and secure both transmission access doors.
TA57131
