4-12.2
Change 1
TM 9-2350-267-20
PRIMARY FUEL FILTER LIFTING BRACKET: REMOVAL AND INSTALLATION
REMOVAL
A Open and secure both transmission access doors.
NOTE
It is not necessary to disconnect fuel lines or drain
fuel filter.
B
Remove two screws (1), two nuts (2), two lockwashers (3) and
two flat washers (4) that secure primary fuel filter (5) to bracket
assembly (6). Discard lockwashers.
C
Pull fuel filter (5) away from bracket assembly (6).
NOTE
Three screws (7) are of different lengths. Mark
upon removal to ensure proper installation.
D
Remove three screws (7) and three lockwashers (8) and remove
bracket assembly (6) from transmission. Discard lockwashers.
INSTALLATION
A
Install bracket assembly (6) on transmission with three screws
(7) and three new lockwashers (8).
B
Secure primary fuel filter (5) to bracket assembly (6) with two
screws (1), two new lockwashers (3), two flat washers (4) and
two nuts (2).
C Close and secure both transmission access doors.
TA312739 #
