4-16
Change 1
TM 9-2350-267-20
ELECTRIC FUEL PUMP: REMOVAL AND INSTALLATION
D Remove two screws (4), two lockwashers (5) and two nuts (6). Discard
lockwashers.
E
Remove electric fuel pump (7).
Tape, Teflon (item 62, Appx D)
F
Remove assembled check valve (8) and elbow (9) from electric fuel pump
(7).
Front slope plate removed (p 3-5).
G Remove assembled elbow (10) and adapter (11) from electric fuel pump
(7).
INSTALLATION
A
B
C
D
E
REMOVAL
F
A Disconnect electrical connector (1).
B Disconnect engine driven fuel pump-to-electrical fuel pump hose (2).
C Disconnect electric fuel pump-to-secondary filter hose (3).
NOTE
Use Teflon tape (item 62, Appx D) on all male pipe
threads during installation.
Install assembled adapter (11) and elbow (10) on electric fuel pump (7).
Install assembled elbow (9) and check valve (8) on electric fuel pump (7).
Install electric fuel pump (7) with two screws (4), two new lockwashers (5)
and two nuts (6).
Connect electric fuel pump-to-secondary fuel hose (3).
Connect engine driven fuel pump-to-electrical fuel pump hose (2).
Connect electrical connector (1).
TA312746