2-100
TM 9-2350-267-20
I
Disconnect wire 486A at FLAME HEATER switch output.
With FLAME HEATER switch ON, check switch for voltage
by placing red multimeter lead in switch and black lead to
ground. If voltage is present, repair or replace wire 486A from
FLAME HEATER switch to engine disconnect bracket (Appx
F). If no voltage is present, go to step J.
J
Disconnect wire 486A at FLAME HEATER switch input and
check for voltage. Place red multimeter lead in wire 486A and
black lead to ground. If voltage is present, replace FLAME
HEATER switch (p 6-19). If no voltage, repair or replace wire
486A from FLAME HEATER switch to FLAME HEATER
MASTER switch (Appx F).
TA310459
