2-98
TM 9-2350-267-20
E
Disconnect wire 10 at FLAME HEATER MASTER switch.
Check for voltage by placing red multimeter lead on wire 10
and black lead to ground. If not voltage, go to step F. If voltage
is present, replace FLAME HEATER MASTER switch.
F
Disconnect wire 10 at circuit breaker output. Check circuit
breaker for voltage by placing red multimeter lead in circuit
breaker output and black lead to ground. If voltage is present,
repair or replace wire 10 to FLAME HEATER MASTER
switch (Appx F). If no voltage is present, go to step G.
TA310457
