SERVICE AND PARKING BRAKE LINKAGE: ADJUSTMENT (CONTINUED)
PARKING BRAKE: ADJUSTMENT
A
B
c
D
E
Loosen parking brake (1) by removing screws and lockwashers
(2).
Unlock parking brake handle (3) (up position). Loosen two
locknuts (4) on forward brake control rod (5) and rear brake con-
trol rod (6).
Turn connecting nut (7) in either direction until holes in park-
ing bracket (1) aline with mating holes (not shown) and with
no pressure applied to bell crank assembly.
Secure bracket to driver’s compartment wall with two screws
and two lockwashers (2). Tighten two locknuts (4) on each con-
trol rod (5 and 6).
Depress brake pedal (8). Pull back on parking brake handle (3).
Remove foot from pedal. Brake should stay locked. To release
parking brake, lift up and in on parking brake handle; then
depress and release brake pedal.
TA310438
2-79
TM 9-2350-267-20
