ENGINE AFES TUBING AND NOZZLES: REMOVAL AND INSTALLATION (CONTINUED)
WARNING
l Turn Maintenance switch on engine T/A panel to
vertical position.
l To pevent injury from accidental discharge of cylinders,
install locking pm in valve actuator of each cylinder.
Also, install and hand tighten anti-recoil plug in each
valve discharge port.
l Use caution when working near fire exdinguisher nozzles
When nozzles discharge, frostbite may occur to personnel,
and small objects may become projectiles causing
SERIOUS INJURY or damage.
l Do not strike cylinder bottles with tools. Do not drop
cylinder bottles. Be careful when handling cylinder
bottles.
CREW COMPARTMENT
NOTE
Tubing for engine AFES is located in both the engine
and crew compartments. Nozzles are located only in the
engine compartment.
REMOVAL
A
B
NOTE
Loosen right-side engine AFES bottle straps and rotate
bottle to provide access for removing elbow (p 14-
28.1).
Disconnect tubes at elbows (1 and 2) and remove elbows (1 and 2) from
discharge plug adapters (3 and 4).
Remove plug adapters (3 and 4) and install anti-recoil plugs in discharge
ports of cylinder bottles (5 and 6).
14-31
Change 4
TM 9-2350-267-20
