CREW AFES CYLINDER BOTTLES (VEHlCLES 345 AND ABOVE): REMOVAL AND INSTALLATION (CONTINUED)REMOVALCrew AFES deactivated (p 14-14.5).AWARNINGAny AFES in need of maintenance or repair is moreProne to accidental discharge. Accidental dishargecould lead to frostbite or other injury. Small particlesor tools become dangerous projectiles when propelledby Halon discharging at 750 psi.Do not strike cylinder bottles with tools. Do not dropcylinder bottles. Be careful when handling cylinderbottles to prevent accidental discharge.BCDEFDeactivate crew AFES (p 14-145).WARNINGInstall locking pin (15) in valve actuator of engineextinguisher cylinder bottle no. 2 and make sure lockingpin is installed in valve actuator of engine extinguishercylinder no. 1 before attempting to remove cylinderbottle assemblies.Install anti-recoil plugs (3) in discharge put of cylinder bottle assemblies(1, 2, 4, 12, 13 and 14).Loosen cable at actuator assembly (p 14-52.20), then remove cotter pin (6),pm (5) and washer (8) to disconnect cable assemble (9) from manual valveactuator of cylinder bottle assemblies no. 3 and no. 4 (2 and 12). Discardcotter pin.Disconnect and remove cable assembly (9) from manual valve actuators (7)of crew cylinder bottle assemblies no. 3 and no. 4 (2 and 12).Loosen two hex nuts (10) and release strap (11) to remove each cylinderbottle assembly (1, 2, 4, 12, 13 and 14) from its bracket.Remove nozzles from cylinder bottle assemblies no. 5 and no. 6 (13 and 14)extenders (12) (p 14-14.7) and replace with anti-recoil plugs (3).14-28.11Change 4TM 9-2350-267-20
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
