M43 DETECTOR MOUNT AND BRACKETS (VEHICLES 1 THRU 377): REMOVAL AND INSTALLATION
NOTE
Refer to TM 3-6665-225-12 for organizational
maintenance instructions on M43 detector kit.
REMOVAL
A
B
C
D
E
Disconnect connector (1).
Remove two screws (2), two flat washers (3), two lockwashers (4) and two
nuts (5). Discard lockwashers.
Remove mount (6) from bracket (7).
Remove bracket (7) by removing three screws (8), six flat washers (9), three
lockwashers (10) and three nuts (11). Discard lockwashers.
Remove bracket (12) by removing three screws (13), three lockwashers (14)
and three flat washers (15). Discard lockwashers.
14-12.1
Change 4
TM 9-2350-267-20