INITIAL SETUP
STE/lCE TEST NO. 10 ENGINE RPM (IDLE)
References:
TM 9-2350-267-10
Equipment Condition:
STE/ICE hooked up to DCA.
A
Dial test select (1) to 10.
Vehicle blocked.
B
Start engine. See TM 9-2350-267-10.
C
Press and release test button (2).
D Check display (3).
1 Test No. 10 passes if display (3) shows between
550-600 rpm.
2 If display (3) shows 0, check connections and repeat test.
3 If display (3) shows erratic reading, check connections and
repeat test.
E
Stop engine. See TM 9-2350-267-10.
F
Return to troubleshooting.
TA312643
2-48.7
Change 1
TM 9-2350-267-20
