INITIAL SETUP
2-48.6
Change 1
TM 9-2350-267-20
STE/lCE TEST NO. 10 ENGINE RPM (CRANKING)
References:
TM 9-2350-267-10
Equipment Condition:
STE/ICE hooked up to DCA.
Vehicle blocked.
A
B
C
D
E
F
Set engine to prevent starting. Locate and hold FUEL
SHUTOFF closed.
Dial test select (1) to 10.
Locate and hold FUEL SHUTOFF closed while cranking
engine. Engine must not start while performing this step.
Press and release test button (2).
Check display (3).
1 Test No. 10 passes if display (3) shows at least 100 rpm.
2 If display (3) shows O, check connections and repeat test.
3 If display (3) shows erratic reading, check connections and
repeat test.
Return to troubleshooting.
TA312642