RIGHT REAR CANISTER COMPARTMENT, SHELVES AND SUPPORTS: REMOVAL AND INSTALLATION (CONTINUED)
N Remove two isolators (28) from front post (2) and support (41)
R Remove support (41) from front post (2) and bracket (73) by
by removing from each, four screws (42), four flat washers (43)
removing one screw (74), one flat washer (75), one lockwasher
and four lockwashers (44).
(76) and one nut (77). Remove bracket (73) held by two screws
(78), two lockwashers (79) and two flat washers (80). Remove
O Remove middle post (8) by removing four screws (45), four flat
support (41) from bracket (73).
washers (46), four lockwashers (47) and four nuts (48) at bot-
tom, and four screws (49), four flat washers (50), four
S Remove front post (2) by removing two brackets (81) each held
lockwashers (51) and four nuts (52) at top.
by four screws (82), four lockwashers (83) and four flat washers
(84). Remove brackets (81) from front post (2).
P
Remove top post (9) by removing two screws (53), two
lockwashers (54), two flat washers (55), screw (56), flat washer
INSTALLATION
(57), lockwasher (58), two screws (59), two flat washers (60), two
lockwashers (61) and bracket (62). Remove top post (9), and
A
Apply zinc chromate paste (item 46, Appx D) between mating
remove bracket (63) from vehicle ceiling.
surfaces of canister rack and vehicle hull.
Q Remove rear post (64) by removing four screws (65), four flat
B Reverse order of removal procedures.
washers (66), four lockwashers (67) and four nuts (68) at bot-
tom, and four screws (69), four flat washers (70), four
lockwashers (71) and four nuts (72) at top.
TA310191
11-15
TM 9-2350-267-20
