11-12
TM 9-2350-267-20
Section II CANISTER COMPARTMENTS
RIGHT REAR CANISTER COMPARTMENT SHELVES AND SUPPORTS: REMOVAL AND INSTALLATION
REMOVAL
A Remove portable fire extinguisher and bracket from front of
I
Remove three guides (14) from vehicle hull rear by removing
canister rack (p 10-7).
from each, four screws (15), four flat washers (16) and four
lockwashers (17).
B
Remove NBC hose and air outlet orifice connector (p 14-8).
J
Remove top shelf (18) by removing four screws (19), four flat
C Remove AFES cylinder bottle No. 2 (p 14-28) and discon-
washers (20), four lockwashers (21) and four nuts (22).
nect AFES harness wire secured to canister rack.
K Remove angle (23) from vehicle hull rear by removing five
D Remove AFES cylinder bottle No. 2 bracket (p 14-30).
screws (24), five flat washers (25) and five lockwashers (26).
E Remove decontamination apparatus and bracket from front of
L
Remove shelf (27) from isolators (28) by removing eight screws
canister rack (p 10-9).
(29), eight flat washers (30), eight lockwashers (31) and eight
nuts (32).
F Remove all restraint bars and restraint straps (p 11-21).
M Remove two isolators (28) from vehicle hull rear by removing
G Remove two folding steps (1) from front post (2) by removing
from each, four screws (33), four flat washers (34) and four
from each, two screws (3), two flat washers (4), two lockwashers
lockwashers (35).
(5) and two nuts (6).
N Remove angle (36) from shelf (27) by removing two screws (37),
H Remove three guides (7) from front post (2) and middle and top
two flat washers (38), two lockwashers (39) and two nuts (40).
posts (8 and 9) by removing from each, four screws (10), four
flat washers (11), four lockwashers (12) and four nuts (13).
TA310188