TM 9-2350-261-34
W A R N I NG
To prevent injury to person-
nel, verify that all grenades
have been removed from
smoke grenade discharger
before
removing
components.
4. Remove three screws (1) and washers (2)
securing smoke grenade discharger (3) to
mounting base (4). Pull away discharger (3)
and disconnect wiring harness (5). Remove
discharger (3).
6. Remove three screws (10), washers (11) and
mounting base (4) from hull.
7. Disconnect wiring harness (5) from hull con-
nector (12). Remove wiring harness.
8. Remove jamnut (13) from connector (12) in
hull. Let connector fall inside driver’s com-
partment.
9. Remove four screws (14), lockwashers (15),
washers (16), mounting plate (17) and gasket
(18 ). Discard lockwashers.
5. Remove four screws (6), lockwashers (7) and
washers (8) securing brush guard (9) to hull.
Remove brush guard. Discard lockwashers.
GO TO NEXT PAGE
6-55
