TM 9-2350-261-20-4
REPLACE LAN A OR B CABLE (W103/W104) (M1068 ONLY) -- Continued
0756 00
INSTALLATION
1.
Install cable W103 or W104 in carrier.
2.
Connect cable W103 plug P1 (1) to data panel assembly A12 (2) jack J2 (3) or W104 plug P1 (4) to data panel assembly
A12 (2) jack J5 (5).
3.
Attach cable to carrier with two clamps (6), washers (7), two screws (8), and new locknuts (9).
Secure excess slack in cable with new tie strap (10).
4.
5.
Attach cable to carrier hull above engine access panel with four clamps (11) and screws (12).
6.
Install two clamps (13) and screws (12) on weldnut.
7.
Attach cable to left side of carrier hull with four clamps (14) and screws (15).
8.
Connect cable W103 plug P2 (16) to roadside data box A13 (17) jack J5 (18) or W104 plug P2 (19) to roadside data
box A13 (17) jack J2 (20).
9.
Attach excess cable slack to carrier hull above access panel with eight new tie straps (21).
FOLLOW-THROUGH STEPS
1.
Connect battery ground lead (WP 0294 00).
2.
Turn MASTER SWITCH to ON (see your -10). Check that electrical system works properly.
3.
Turn MASTER SWITCH to OFF (see your -10).
END OF TASK
0756 00-3/4 blank
