TM 9-2350-261-20-4
REPAIR POWER CONTROL ENCLOSURE FACEPLATE AND
BRACKET (M1068 ONLY)
THIS WORK PACKAGE COVERS:
INITIAL SETUP:
Personnel Required
Maintenance Level
Power-Generation Equipment Repairer 52D10
Unit
References
Tools and Special Tools
Equipment Condition
Materials/Parts
Engine stopped (see your -10)
Carrier blocked (see your -10)
All external power disconnected
Locknut (4)
(TM 11-7010-256-12&P)
Locknut (4)
Battery ground lead disconnected (WP 0294 00)
Lockwasher (4)
Lockwasher (6)
Lockwasher (10)
Tie strap (AR)
DISASSEMBLY
1.
Remove two screws (1), lockwashers (2), and bracket (3) from enclosure (4). Discard lockwashers.
2.
Remove ten screws (5), lockwashers (6), and faceplate assembly (7) from enclosure (4). Lower faceplate (7). Discard
lockwashers.
3.
Remove tie straps (8) from leads as required. Discard tie straps.
4.
Remove four screws (9), locknuts (10), and washers (11) from faceplate hinge (12). Discard locknuts.