TM 9-2350-261-20-4
REPLACE SMOKE GENERATOR ADAPTER ACCESS PLATE AND GASKET
0708 00
(M1059 ONLY) -- Continued
NOTE
Left and right access plates and gasket are replaced the same way.
1.
Disconnect air hose (13) and fog oil hose (14) from two elbows (1).
2.
Disconnect electrical cable assembly (12) from adapter access plate fitting (7).
3.
Remove four screws (10), lockwashers (11), and adapter access plate (2) from hull. Discard lockwashers.
4.
Disconnect exterior cable (15) from interior cable (18) at adapter access plate (2).
5.
Remove four screws (16), locknuts (17), and interior cable (18) from adapter access plate (2). Discard locknuts.
6.
Remove dust cover (6) four screws (8), locknuts (9), and adapter access plate fitting (7) from adapter access plate (2).
Discard locknuts.
7.
Remove gasket (5) from plate (2). Replace if damaged.
NOTE
If only gasket is to be replaced, go to INSTALLATION Step 1.
8.
Remove two jamnuts (3) and lockwashers (4) from two elbows (1). Remove elbows from plate (2). Discard lockwashers.
0708 00-2