TM 9-2350-261-20-4
REPLACE M13 NBC HEATER WIRING HARNESS (M1068 ONLY) -- Continued
0684 00
18. Secure wiring harness (1) to commander's heater inlet hose (2) with new tie straps (3).
19. Install clamp (4) on driver's heater inlet hose (5) and wiring harness (1). Secure clamp with screw (6), washer (7),
and new locknut (8) on frame (9).
20. Install circuit lead 537A (10) on driver's heater (11).
21. Install four clamps (12) on wiring harness (1). Secure clamps with four screws (13) and new lockwashers (14) on
bulkhead weldnuts.
22. Secure cable (15) to wiring harness (1) with new tie strap (16).
23. Install wiring harness (1) on NBC control box (17).
FOLLOW-THROUGH STEPS
1.
Connect battery ground lead (WP 0294 00).
END OF TASK
0684 00-7/8 blank
