TM 9-2350-261-20-4
REPLACE M13 NBC HEATER HOSES (M1068 ONLY) -- Continued
0682 00
19. Loosen clamp (1) on rear operator's outlet hose (2). Remove hose from connector (3) and rear operator's heater (4).
20. If either of two brackets (5) are damaged, remove two screws (6), washers (7), locknuts (8), and damaged bracket (5)
from bracket (9). Discard locknuts.
21. If bracket (9) is damaged, remove four screws (10), washers (11), lockwashers (12), and bracket from table supports.
Discard lockwashers.
22. Cut tie straps (13) securing electrical leads to rear operator's inlet hose (14). Discard tie straps.
23. Remove two screws (15), lockwashers (16), and clamps (17) from sponson. Remove clamps from rear operator's inlet
hose (14). Discard lockwashers.
24. Loosen two clamps (18) on rear operator's inlet hose (14). Remove hose from rear operator's heater (4) and manifold
(19).
0682 00-4
