TM 9-2350-261-20-4
REPLACE COOLANT HEATER EXHAUST ELBOW AND PIPES -- Continued
0647 00
REMOVAL
1.
Loosen three clamps (1) on upper exhaust pipe (2), on lower exhaust pipe (3), and on exhaust elbow (4).
WARNING
Older gaskets are made out of asbestos. Handle with care. Discard older gasket properly as a
hazardous material per local standard operating procedure.
2.
Remove four screws (5), washers (6), upper pipe (2), and gasket (7) from exhaust grill housing. Discard gasket.
3.
Remove upper pipe (2) from lower pipe (3). Remove lower pipe (3) from elbow (4).
4.
Remove elbow (4) from coolant heater.
