TM9-2350-261-20-1
1. Remove cable W109 plugs P1 (1) and P2 (2) from Data
Panel A13 jacks J109 (3) and J110 (4).
2. Remove cable W110 plugs P1 (5) and P2 (6) from Data
Panel A13 jacks J111 (7) and J112 (8).
3. Measure resistance between center pins of plugs P1 and
P2 of each cable.
4. Does multimeter read 0 ohms for each measurement?
NO
1. Replace cable W109 and/or
W110 (page 40.1-5).
2. Verify no faults found.
GO TO NEXT PAGE
Change 3
3-226.129