TM 9-2350-261-20-1
1.
2.
3.
4.
Set MASTER SWITCH to OFF.
Tag leads E1 thru E5 before removal. Remove cable W5
leads (1) from posts on terminal block TB2 (2).
Measure resistance between sockets of plug P6 (3) and
W5 leads (1) as follows:
Socket A to lead E1
Socket B to lead E2
Socket C to lead E3
Socket D to lead E4
Socket E to lead E5
Does multimeter read 0 ohms for each measurement?
1. Replace cable W5 (page
40.1-62).
2. Verify no faults found.
GO TO NEXT PAGE
Change 3
3-226.117
