TM 9-2350-261-20-1
1. Turn MASTER SWITCH to OFF.
2. Remove instrument panel for access. See task:
remove instrument panel mounts and ground lead
(page 11-2).
3. Remove front main harness plug (1) from lighting
control switch jack (2).
4. Measure resistance between lighting control switch
jack (2) pins F (3) and M (4).
5. Does multimeter read 0 ohms?
1. Install dimmer switch and
front main harness plug on
dimmer switch jack.
2. Replace lighting control
switch (page 11-9).
3. Verify no faults found.
\
1. Repair front main harness circuit 16 (page 14-3).
2. Verify no faults found.
3-79
