TM 9-2350-261-20-1
1. Has regulator been replaced?
1. Replace regulator
(page 9-40).
2. Verify no faults found.
1. Replace generator (page 9-31 or 9-34).
2. Verify no faults found.
1. Does your carrier have a 100 amp charging system?
1. Install regulator on regulator plate.
2. Removeeight nuts (1), washers (2), and screws (3)
from master switch panel (4). Pull panel away from
distribution box (5).
3. Measure resistancebetween front main harness circuit
3 terminal (6) on circuit breaker (7) and ground.
4. Does multimeter read 0 ohms?
1. Replace generator-regulator
circuit breaker (page 9-42).
2. Verify no faults found.
1. Repair front main wiring harness circuit 2 or 3
(page 14-3).
2. Verify no faults found.
3-62
Change 1