TM 9-2350-261-20-1
1. Install ignition wire on igniter.
2. Remove air box heater harness plug (1) from
ignition coil (2).
3. Turn MASTER SWITCH to ON.
4. Turn air box heater switch ON.
5. Measure voltage between air box heater harness
plug sockets A (+) and B (-).
6. Does multimeter read less than 17 volts?
1. Release air box heater switch.
2. Turn MASTER SWITCH to OFF.
3. InstalI ignition wire on coil.
GO TO NEXT PAGE
1. Replace ignition coil
(page 6-132).
2. Verify no faults found.
3-41