TM 9-2350-261-10
2. Make sure heater fuel supply
valve is open.
3. Press PRESS-TO-TEST
switch. Check that HEATER
light comes on.
3.1. Make sure HI-LO switch is
set to LO before starting.
4. Move RUN-OFF-START
switch to START for 2 min-
utes. If HEATER light does
not come on, move
RUN-OFF-START switch to
OFF for 10 seconds. Move
RUN-OFF-START switch to
START for 1 minute. If
HEATER light does not come
on, move RUN-OFF-START
switch to OFF for 10 seconds.
Move RUN-OFF-START
switch to START for 1 minute.
If heater fails to start after
third try, troubleshoot heater
(page 3-14).
GO TO NEXT PAGE
Change 5
2-195
