TM 9-2350-247-34
INSTALL TURN SIGNAL KIT — Continued
0076 00
60. Remove screw (6) and nut (7) that secure two retainers (8) and one bushing (9) in hull. Remove and discard two rods
(10) from bushing.
61. Thread circuit 22-460 and 21 leads of wiring harness (11) through bushing (9). Place bushing and two retainers (8) on
hull. Secure with screw (6) and nut (7).
62. Install shell (12), sleeve (13), and terminal (14) on leads of wiring harness.
63. Connect cable (15) to main wiring harness circuit 23 lead (16).
0076 00-23
